Okay, the vibration was stopped. New motor mounts in place, it was time to tackle the exhaust header. The 4.0L engine is prone to exhaust header issues. And, the exhaust is a critical part of an engine. You can improve performance of an engine by increasing air flow through the engine. Basically, the hot exhaust gases need to go somewhere. Why not through clean bends of an aftermarket performance header?
The stock 4.0L exhaust manifold would not place well in an airflow test. On the other hand, aftermarket headers are tubular and designed for efficient air flow.
Take your pick. There are several vendors providing quality products in a variety of price ranges. Each has their advocates. Some advocate for ceramic coating. All agree on tubular construction.
I did a review of the various products available and selected the JBA Performance Exhaust header as a reasonable price option. JBA has long been respected for their aftermarket headers for improved performance with the Mustang. They now carry that reputation to the Jeep 2.5 and 4.0L engine market.
Installation is a matter of removing a lot of nuts, bolts, screws, pieces, and parts before you can access the bolts holding the header in place. Once the header is removed, the head mating surface needs good cleaning to remove the old gasket material and carbon deposits.
A new head flange gasket is provided. Use care when installing the header so as not to damage the gasket. With the header in place, the remaining pieces and parts can be reinstalled. The final connection is to the exhaust pipe. The JBA header does have a direct fit to the exhaust pipe without need of a collector gasket. New collector bolts, nuts and lock washers are provided.
The complete job requires attention to detail and no special tools. However, as the fuel line does need to be disconnected, allow time for the fuel pressure to bleed. And, it is easier to work on a cold engine.
Okay, does it really make a difference? If I were to brag about increased performance, I would have engine dyno tests to back up the claims. I don’t; but, I did note a significant performance improvement.
On a recent trip through the mud hills of Ocotillo Wells SVRA, I was pleased that I now have better throttle control at off-idle.
Overall, performance is a subjective determination based on intake, exhaust, and overall gearing. Having better off-idle throttle is a performance improvement and keeping the engine running smooth is important.
Work was done by:
Roger Daniel's Alignment & Brake
8517 Ablette Road, Shop F
Santee, CA 92071
BAR # ARD214109
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting. Copyright (c) 1999-2020 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission. You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material. All corporate trademarks are the property of their respective owners.